Precision Tile Installation from Substrate to Final Grout
At Hill Construction, tile installation is more than laying patterns—it’s about delivering surfaces that endure wear, moisture, and time. Whether part of a high-end lobby, commercial kitchen, or restroom core, our tilework is built on proper prep, skilled labor, and material expertise.
We manage every step, from substrate prep and waterproofing to layout, spacing, and finishing. Our seasoned installers work with porcelain, ceramic, stone, and specialty tile—always with an eye on long-term performance and visual impact. For tilework that holds up under pressure and elevates your interior, Hill Construction is the team you want on site.
Tile work might be a finish trade, but it starts early. At Hill Construction, we understand that great results begin with thorough substrate preparation and trade coordination. Our teams walk jobs early to verify conditions, identify conflicts, and stage materials to avoid delays.
We collaborate with designers and owners to confirm tile types, layouts, and transitions. Mockups are used where needed to lock in expectations. We plan for specialty edging, pattern shifts, and mixed materials—especially in retail or public-facing environments.
Substrates are checked for levelness, deflection, and compatibility with adhesives. We float floors, reinforce walls, and add waterproofing where required to ensure lasting adhesion and system integrity.
Our tile crews install with precision, handling all types of patterns: stack bond, staggered, herringbone, or custom inlays. We cut corners cleanly, maintain tight joints, and clean as we go.
To close out, we apply sealers where specified, coordinate punch walks, and document maintenance requirements for the end user’s benefit.
Not every tile product behaves the same. Hill Construction brings experience across a full spectrum of tile materials and bonding systems, helping you avoid common pitfalls and maximize service life.
A successful tile installation begins with the right material selection. Not all tiles are suited for every environment, and missteps in choice or installation can lead to costly failures down the line. At Hill Construction, we guide clients through the specification process to ensure the chosen tile meets aesthetic goals, durability standards, and technical demands. Whether it’s a high-traffic commercial floor, a moisture-prone bathroom, or an eye-catching feature wall, we bring the right combination of product knowledge and installation expertise to the table.
We routinely install:
Porcelain and Ceramic: Durable, easy to clean, and available in endless styles.
Natural Stone: Granite, marble, limestone, and slate for premium environments.
Glass Tile: Accent areas, backsplashes, and decorative zones.
Large Format Tile: Reduces grout joints and improves visual consistency.
Mosaic Sheets: Used for wet areas, pools, and unique wall treatments.
Each tile type is matched with the appropriate setting material, grout, and prep method. We work closely with vendors to validate compatibility and warranty requirements before we start.
Tile installation needs to meet more than aesthetic goals—it must perform for the building’s function. At Hill Construction, we customize our approach based on your facility type and user demands.
Tile solutions must be tailored not only to aesthetics but also to how a space is used daily. At Hill Construction, we begin each project by understanding the demands placed on your tile surfaces—from heavy foot traffic and spill exposure to hygienic requirements or branding elements. This insight allows us to recommend materials and methods that won’t just meet code—they’ll outperform expectations and reduce maintenance needs long-term.
We’ve tiled spaces in:
Healthcare Facilities: Where slip resistance, cleanability, and chemical resistance are critical.
Commercial Kitchens: Using quarry tile and epoxy grout for heat, moisture, and grease resistance.
Retail Environments: Combining visual appeal with traffic resistance.
Offices and Lobbies: Featuring large format tiles with high-end finishes.
Each environment brings specific concerns—like maintenance cycles, ADA slope transitions, or lighting impact on sheen. We understand the nuances and build for performance.
Tile systems are only as good as their foundations. We ensure that all assemblies meet fire ratings, slip resistance, and water resistance as required by code.
We coordinate closely with MEP trades to avoid conflicts at floor drains, wall penetrations, and cleanout covers. We also build to ANSI and TCNA standards for substrate flatness, deflection, and bond strength.
Safety is baked into our install methods. We mark off wet work zones, control dust from saws, and limit adhesives that contain VOCs in occupied areas.
Whether it’s a shower wall or a busy corridor, we take steps to control moisture migration and preserve integrity for the long haul.
Details like grout joint width, color, and finish can make or break the final look. Hill Construction guides clients through options that enhance both performance and design.
We use grout types based on usage: cementitious, epoxy, or urethane. Color consistency is achieved by strict water controls and batch matching.
Sealants are applied to natural stone and porous tile surfaces where specified. We also offer anti-microbial and stain-resistant additives to support long-term durability.
Finish work is inspected under multiple lighting angles to ensure alignment, flush edges, and clean transitions. Final product is beautiful, durable, and done right.
At Hill Construction, tile installation is a supervised trade. Our superintendents and owners maintain visibility throughout the install process to ensure results match expectations.
We post schedules daily, hold start-of-day crew briefings, and track progress with photo logs and checklists. We also encourage direct communication with GCs and other trades to avoid any sequencing issues.
By staying actively involved, we reduce errors, avoid rework, and ensure punch lists are minimal.
A high-performance tile installation isn’t just defined by the materials you see—it’s equally about what lies beneath and how all components work together. At Hill Construction, we look beyond the surface to design tile systems that perform under real-world conditions. From thermal expansion to foot traffic loads and cleaning routines, our team evaluates how tile will behave in its environment long before the first piece is set.
The right tile installation should look great and work hard. At Hill Construction, we emphasize features that impact longevity and ease of maintenance:
Crack Isolation Membranes: Prevent fractures due to substrate movement.
Expansion Joints: Manage temperature and moisture shifts in large tile fields.
Non-Slip Ratings: Ensure compliance in wet or public areas.
Waterproofing Systems: For restrooms, showers, and food prep zones.
Custom Layouts: Add visual interest and align with lighting or architecture.
These features may be hidden under the surface, but they’re what separate average installs from high-performance floors and walls.
We use high-quality tools and laser layout systems to ensure accuracy. Wet saws, snap cutters, and grinders are maintained regularly to keep edges crisp and joints uniform.
We work with trusted distributors and reps to verify product performance and availability. Samples, MSDS, and warranty documentation are reviewed up front.
Our tile installers are cross-trained to manage transitions, thresholds, and backer board systems without holding up other trades. We also use dust extraction vacuums and low-noise equipment in occupied spaces.
This professionalism allows us to deliver top-tier finishes even in sensitive or high-traffic environments.
At Hill Construction, tile isn’t filler work—it’s a precision craft that reflects the quality of your entire build. Our approach is detail-oriented, deadline-conscious, and quality-driven.
We plan, execute, and close out tile installations with full transparency. Our clients count on us to meet specifications, minimize disruption, and leave behind beautiful surfaces that last.
From budget to baseboard, our communication is clear and consistent. And with every tile we set, we reinforce your confidence in our work.
Choose Hill Construction for tile installations that blend craftsmanship with accountability.
1. What types of tile do you install?
We install ceramic, porcelain, natural stone, glass, quarry, and large-format tile in floors and walls across commercial settings.
2. Can you install tile in occupied buildings?
Yes. We use dust control systems, low-VOC adhesives, and off-hour scheduling to work safely in active spaces.
3. How do you handle uneven subfloors or cracked concrete?
We prep substrates by grinding, floating, or installing crack isolation membranes as needed to ensure long-lasting installs.
4. Do you provide waterproofing services for wet areas?
Absolutely. We install waterproofing membranes for showers, restrooms, and kitchens to protect adjacent spaces.
5. Can you help select tile and finishes?
Yes. We work with owners, designers, and vendors to select materials that meet aesthetic goals, performance needs, and budget constraints.
From planning to completion, Hill Construction delivers reliable, high-quality results. Contact us today to get started on your next project.
Partnering with Hill Construction means you can count on quality craftsmanship, efficient execution, and cost-effective solutions—delivered with professional oversight from start to finish.
© 2025 Hill Construction. All Rights Reserved. Designed By SFL.Media